Amplifier and Wiring Kits by RetroSound
WARNING: May contain chemicals that may cause cancer or reproductive harm.
Amplifiers:
4-Channel - Part No. 230-580
The RetroSound Quadraphonic amplifier is a plug-and-play solution for adding additional power to your classic car stereo system. The Quadraphonic is a 4-channel amplifier and connects directly to your RetroSound radio delivering 45-watts RMS to all four speakers. Pair it with a RetroSound 8" powered subwoofer for a complete audio system that's a breeze to install. The Quadraphonic amplifier offers an exceptional dynamic range and low distortion with built-in variable high-pass filters for both front and rear channels.
Listen to your favorite 60's rockabilly or 80's pop hits in your classic ride with perfect clarity and experience the music the same way you do in your daily driver. Dual gain control allows you to match the input sensitivity to the output of your RetroSound radio for the best possible audio reproduction in your classic vehicle.
The Quadraphonic is a Class D (digital) amplifier with advanced circuitry and thermal overload protection. The amplifier's ultra-low current draw, advanced shielding, and compact size of just 7.05" x 3" x 1.65" allows installation almost anywhere, even behind the dashboard, where most amps fail due to electrical interference! A perfect solution for classic cars where space is limited.
- 4-channel amplifier
- Full-range Class D digital circuitry
- 45-watts RMS x 4 channels full-range at 4 ohms
- Built-in variable high pass filters
- Advanced circuitry and thermal protection
- Directly connects to your RetroSound radio
- Works with any aftermarket radio with low-level RCA outputs
- Optional wiring kit available for aftermarket radios
- Compact size fits almost anywhere
- Dimensions: 7.05" x 3" x 1.65"(17.9 cm x 7.1 cm x 4.2 cm)
5-Channel - Part No. 230-581
Power your whole system with the RetroSound Technophonic amplifier. The Technophonic is a 5-channel amplifier that pushes 65-watts RMS to all four speakers and delivers up to 330-watt RMS to your subwoofer. Switch the Technophonic to 2 or 4 channel modes for radios with only 2 or 4 inputs, and the Technophonic intelligently routes the selected inputs to all five balanced outputs. The Technophonic is 2-ohm or 4-ohm stable and bridgeable, giving you more flexibility to build your system. The low-level RCA inputs allow you to connect the Technophonic effortlessly to your RetroSound radio, or any aftermarket stereo with RCA outputs. Whether you're looking to build a balanced system or going for high power and performance, the Technonphonic amplifier has everything you need.
Crank up the volume without distortion. The Technophonic features low current draw and Class D Digital circuitry, providing exceptional dynamic range and low distortion so you can listen to your favorite songs as loud as you want! High-pass and low-pass filters let you fine-tune your audio for the best listening experience, with remote gain control to adjust bass levels on the fly from the front seat.
- 5-channel amplifier
- Full-range Class D digital circuitry
- 65-watts RMS x 4 channels full-range at 4 ohms (95-watts RMS x 4 at 2ohms)
- 225-watts RMS x 1 channel subwoofer at 4 ohms (330-watts RMS at 2 ohms)
- Selectable input mode switch for 2, 4, and 5 channel operation
- Bridgeable
- 2-ohm and 4-ohm stable
- Built-in variable low pass and high pass full-range filters
- Bass boost (0-12db) and remote gain control
- Advanced protection circuitry
- Easily connects to your RetroSound radio via RCA inputs
- Works with any aftermarket radio with low-level RCA outputs
- Dimensions: 12.9 in x 5.3 in x 1.87 in (33 cm x 13.4 cm x 4.75 cm)
- Fuse Rating: 60-amp
Wiring Kits:
4-Channel - Part No. 230-585
The RetroSound 4-Channel Amplifier Wiring Kit is everything you need to install a 4-channel amplifier in your classic vehicle. This kit includes one 60-amp mini-ANL fuse and quality fuse holder, thirteen feet (4 meters) of 8-gauge red power wire, five feet (1.5 meters) of 8-gauge black ground wire, thirteen feet (4 meters) of 8-gauge blue turn-on wire, two sets of RCA cables, two 8-gauge ring terminals, and two 18-gauge butt connectors.
5-Channel - Part No. 230-586
The RetroSound 5-Channel Amplifier Wiring Kit is everything you need to install a 5-channel amplifier in your classic vehicle. This kit includes one 60-amp mini-ANL fuse and quality fuse holder, thirteen feet (4 meters) of 8-gauge red power wire, five feet (1.5 meters) of 8-gauge black ground wire, thirteen feet (4 meters) of 8-gauge blue turn-on wire, three sets of RCA cables, two 8-gauge ring terminals, and two 18-gauge butt connectors.
Moss Has You Covered
- All products we sell are warrantied against defects in material and workmanship by the original equipment manufacturer or Moss Motors, Ltd., for 12 months from the date of shipment.
- We will replace the product or refund your purchase price at our discretion.
- The warranty does not cover labor, failure of a related component, failure resulting from faulty installation, nor would the liability of Moss Motors exceed the cost of the original component.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
- Many of the brands we carry have their own warranty terms that have you covered outside of our 12 month protection.