Adjustable Engine Mount Kit by AWR
WARNING: May contain chemicals that may cause cancer or reproductive harm.Discover the next-level Miata motor mounts by AWR Racing.
AWR's adjustable mounts are designed to cater to more mild to extreme builds. The eccentric bolt allows you to position the motor anywhere you want within your build without having to support the motor and re-position the thru-bolts during this process. You can now position the motor higher or lower, to assist in aligning turbo or supercharger piping, and to alleviate any clearance issues that you may be facing with your build.
Their new adjustable engine mount kit is a direct bolt-on replacement for Miatas with chassis with a 1.6L motor. The kit includes fabricated steel replacement motor mounts with Energy Suspension polyurethane bushings for more secure engine support, enhancing shifting and overall car performance. AWR Racing provides engine mounts with different durometer options to cater to the needs of daily, aggressive, and track-driven builds. If you want less engine movement, cleaner shifts, and other benefits, AWR Racing is the go-to.
Features:
- Fabricated engine mounts made in the USA, that utilize Mazda OEM eccentric hardware. Backed with a lifetime warranty.
- Laser cut and CNC folded.
- TIG Welded at AWR Racing headquarters in San Diego, California.
- Adjustable height with new cam-bolt technology.
- Energy Suspension polyurethane bushings to suit all builds.
- Powder-coated gunmetal gray for extra durability and beauty.
Proper installation of mounts is essential to ensure maximum performance and safety of your vehicle. It is important to note that the mounts are specifically designed to be set at stock height, and caution must be taken to avoid lowering either side too much. Dropping the engine too low could damage the brake line and harm the motor if not aligned correctly. Be mindful of this when rotating the cam thru-bolt. Loosen retaining nut 1/2 to 1 full turn maximum. Raise and lower the motor by the captive bolt head only.
To achieve the best results, torque the eccentric bolt to 100-120 ft lbs. Once the mounts are installed, simply loosen the locking nut, rotate the cam to meet your requirements, and lock the nut in place. No need to jack or support the motor to pull the thru bolt and re-insert it to change the height. With these simple steps, your mounts will be perfectly aligned and ready for action.
Choosing the Best Durometer:
Since 1995, AWR Racing has been producing top-of-the-line Miata mounts. Their motor mounts utilize larger bushings to reduce NVH, specifically cabin vibration. Here's a breakdown of their durometer options and their recommended usage:
- 62 durometer (ultra soft) for daily driving with little to no modifications
- 70 durometer (soft) for lightly to intermediate modification levels
- 88 durometer (medium) for modified street and track builds
- 95 durometer (hard) for highly modified/extreme builds
If your first option doesn't suit your needs, don't worry! All of their bushings can be swapped out or replaced. Keep in mind that initial NVH (noise, vibration, and harshness) may be present but will settle after approximately 500 miles driven. Detailed install guide included.
Moss Has You Covered
- All products we sell are warrantied against defects in material and workmanship by the original equipment manufacturer or Moss Motors, Ltd., for 12 months from the date of shipment.
- We will replace the product or refund your purchase price at our discretion.
- The warranty does not cover labor, failure of a related component, failure resulting from faulty installation, nor would the liability of Moss Motors exceed the cost of the original component.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.
- Many of the brands we carry have their own warranty terms that have you covered outside of our 12 month protection.